18000W Industrial Spot Coolers ,7000m3/h Condenser Air flow Spot
Industrial spot cooler: The 18 kW mobile spot cooler is built specifically to cater to
commercial and industrial applications. This portable air
conditioner can be powered from a standard power point, provides
refrigerated cooling and is fitted with a condensate tank. The easy
installation of this unit makes it ideal for a variety of
applications from offices, to server rooms and data centres.
Meanwhile, spot air cooler system includes everything needed for a
single point cooling station that offers a low cost, reliable,
maintenance free solution to a variety of industrial spot cooling
problems. With the turn of a knob , you can select a precise and
comfortable temperature in the room.
|Compressor Overload Relay||yes|
|Fan Motor Protection||yes|
|Anti Freezing Thermostat||yes|
|Automatic Full Tank Shut-Off||yes|
|High Pressure Switch||yes|
|Compressor Short Cycle Protection||yes|
|Fan Mode Switch||yes|
|Return Air Thermostat||yes|
|Automatic Restart Available as Accessory||yes|
|Evaporator Air flow||4000m3/h|
|Condenser Air flow||7000m3/h|
|Max consumption power||7800W|
|Compressor||Fully enclosed rotary|
|Condensate Tank Capacity||External water pipe|
Control Panel Key Buttons:
5. Set Temperature
7. Current Temperature
8. Target Temperature
There are two fi lters in the unit. The evaporator fi lter is
located at the front of the unit. The condenser fi lter is located
at the side of the unit.
1. loosen up 2 bolts on the front fi lter guard.
2. Slide fi lter up and use a vacuum cleaner to remove the dust
from the fi lter.
3. If the fi lter is heavily covered with dust and dirt, warm water
and mild soap or neutral detergent may be used to wash the fi lter.
Do not use any other chemicals to clean fi lter, as they will
likely damage the fi lter.
4. Dry the fi lter in a shaded area before replacing it. Do not
operate the unit without the fi lter installed and the fi lter
guard in the closed position.
5. Replace the clean fi lter and close the fi lter guard.
6. To replace the condenser fi lter, place the top of the fi lter
in the guide and slide the fi lter up until the bottom of the fi
lter clears the frame. Then push the bottom of fi lter into the
guide and let fi lter gently fall inside the guide.
If you face any problems in future during testing process we
promise we will give you a reply within 48 hours and solution
provide within 3 working days. We can offer operation video and
English operation muanual. We can provide video-conference. If
customers require on-site service, the transport and travel expense
shall be borne by customer.
24 Hours online service for your consult.
Help choose right model,and a series of service,person,advise.
2. Middle service
--Give you best offer
--Choose payment term you convienent.
--Promptly production and delivery,inform you in time.
--Can provide invoice value as you like to decrease your tax.
3. After sale service
--1 year warranty service and all life maintenance.
--Remote control technical consult
--Free installation DVD